How To Restart Firestick
There are basically two ways of restarting your Firestick. You can do it by going to Settings, scroll across to My Fire TV.
Go down to Restart..
Youll be prompted again to confirm if you want to restart. Just press Ok and your device will reboot. Youll also get a Powering Off message on the screen.
Alternatively, you can restart your Firestick directly using the remote. To do this just hold down the Select and the Play/Pause keys on your remote at the same time for about 5 seconds. The device will restart without showing you any confirmation messages on the screen.
How Do You Sync A Fire Stick Remote
To connect an additional or replacement Fire TV remote: Select Settings from the Fire TV menu. Open Bluetooth drivers and devices. Select Amazon Fire TV Remotes, then select Add New Remote. Press and hold the Home button on the new remote for up to 10 seconds.
How to reprogram a firestick remoteHow do I Reset my firestick remote? 1 answer. Re: Resetting the Firestick remote Try the following: Press and hold the Select button for 5 seconds to put the remote into pairing mode. Press and hold the Select + Play buttons for 5 seconds to reboot the device. Reboot the device: Settings} System} Reboot and after rebooting, unplug the power cord for 5 seconds and then plug
Why Does My Fire Stick Need Rebooting
Here are a few reasons why you might be seeing the amazon fire stick error code device reboot required on your Fire Stick device:
- Your device has trouble staying connected with the Internet.
- The pairing of your device to the TV isnt stable and needs to be re-paired.
- The remote batteries are running out of charge and the FIreStick might not be receiving the commands.
Recommended Reading: Amazon Enter Gift Card Code
How To Factory Reset Firestick
- First, go to your FireStick’s home screen if it isn’t already there. This is what the home screen looks like
- Then go to the top of the home screen where you will see the menu bar. Select the last option, Settings from the menu bar.
- When you get to the settings menu, scroll to the right and tap on My Fire TV.
- You should see the following options. Scroll down and tap Restore factory settings.
How To Restart Firestick With Remote
Flickr – Photo by Publisagmo
To learn how to restart firestick using your remote, you can simply follow these easy steps:
1.Turn on your TV and wait for your screen to display your Fire Stick home screen.
2.On your remote, press and hold the “Home” button for a few seconds. Using your remote click on “Settings.”
3.In “Settings” scroll down and click “My Fire TV” and then scroll down and click “Restart” to restart your device.
You May Like: Can You Use Ebt On Amazon Whole Foods Delivery
How To Restart Your Firestick Device
This is a step-by-step guide on how to Restart FireStick, Fire TV, and Fire TV Cube.
FireStick provides an incredible TV experience to its users. However, like all devices, FireStick can also get slow due to different reasons like lack of storage.
In many cases, other than lack of storage, a simple reboot or restarting your FireStick can resolve issues that you might be having with your device.
This article contains three different methods in which you can restart your FireStick TV without a problem.
All methods are quick and easy for all types of FireStick users. Restarting allows the device to return back to its peak performance mode.
All running apps will be automatically closed when you restart your FireStick. It is to be noted, however, that restarting will not reset your FireStick to its Factory or default settings, a factory reset is needed in that scenario.
Restart Firestick Directly With The Remote
If your FireStick screen is stuck preventing you from navigating properly and accessing the Settings, you may directly reboot with the remote controller using a combination of buttons. It is a hard reboot that force closes any running apps. Use this method only when the first method does not work.
Here is how you do it:
1. Hold down the Select and Play/Pause keys on the remote together for about 5 seconds
2. Your FireStick will start to reboot directly without throwing any confirmation prompt on the screen as with the first method
Read Also: Freetime Subscription
How To Restart Amazon Fire Tv From The Settings
If you dont like the idea of just bluntly plugging your Fire TV out and back in again, you can always restart it from the TV itself.
Navigate your Fire TV until youre at the home screen, or you can just press the home button. Scroll up on the home screen until youre highlighting the home tab, and then scroll across to settings. Then, scroll to the right and on My Fire TV. In this menu, underneath sleep mode, you should see the word restart. Click on it, and the Fire TV should boot itself back up.
How To Restart Fire Stick
No matter how well you follow guides or instructions, sometimes things just go wrong. Often this is for seemingly no reason and can be incredibly irritating.
If you encounter a problem out of the blue with your Firestick, restarting it may be the best option.
You have three different methods when it comes to how to restart Firestick, so were going to cover all of them and let you pick which you prefer.
The first method is by far the most obvious: the old reliable turn it off and on again trick. Specifically, youre going to want to plug your Amazon Fire TV out, leave it for a few minutes, and then plug it back in.
This is what is known as a hard reboot, and results in the Fire TV system launching from the beginning, which should hopefully snag any issues that arose previously.
Don’t Miss: Amazon Prime Driver Requirements
How Do I Set Up My Alexa Voice Remote
Connect your Alexa voice remote to your Echo. Select your device, then select Echo Remote. Pair voice controls on Echo devices to the screen: Say “Go to Settings” or swipe down from the top of the screen and select “Settings.” Select Device options. Select Pair with Amazon Echo Remote and follow the on-screen instructions.
Can’t Pair Firestick Remote
- Restart your Fire TV Stick. I know You just dropped your Fire TV Stick and now I will ask you to restart it.
- Remove the battery from the remote control. As unlikely as it may sound, sometimes the batteries in the remote are misaligned. Bring
- Replace the battery. One of the most common reasons to use the Fire TV Stick
You May Like: Amazon Locker Whole Foods
Unplug From The Power Source To Restart Firestick
This is another way of force restarting your FireStick. Use it only when the first two methods do not work.
This method to restart FireStick comes in handy when your FireStick screen is frozen and would not respond to any remote commands. It is also useful when your Amazon FireStick remote controller does not work at all.
All you need to do is unplug your FireStick or Fire TV device from the power source. It would be a good idea to wait for about a minute before plugging the device back into the power supply.
This may be the easiest method to restart FireStick if the power source is within easy reach.
How To Turn Off Sleep Mode On Your Fire Stick:
Turning off sleep mode is very simple. Anytime you turn off the device using the methods already described, it goes into sleep mode. To turn it back on, all you have to do is press any button on the remote. It will automatically activate the device. The same works on the Amazon Fire TV app. Pressing anything on the app will turn on the Fire TV Stick if you are connected.
Read Also: Unsubscribe From Audible
How Do You Restart The Amazon Fire Stick
Here’s how to factory reset your Fire TV Stick: Open the Fire TV interface and go to the main menu. In the menu items at the top of the screen, scroll to the right and select Settings. Scroll to the right and select Device. Select “Restart” and confirm in the next window. The Fire TV Stick will restart automatically.
Turn Off Fire Stick With Your Phone App:
Even if you cant find your Fire TV Stick remote, no worries. You can actually use your phone to turn off the device.
First, youll need to have the Amazon Fire TV app already downloaded. Once you have done this, open the app and connect to whatever device you want to control.
Second, you should notice a few icons towards the bottom of the screen. One of them is labeled remote. Select this icon to switch over to remote mode.
Finally, youll see a similar layout on-screen to your Amazon Fire TV Stick remote. To access what you need, select the small image of a gear towards the top of the screen. In this case, you do not need to press the home button as you would with the standard remote. You should get an option that says sleep with a moon icon. Just press that, and youre good to go.
Read Also: How Do I Use Prime At Whole Foods
Resetting A Basic Edition Remote
1. Press and hold the Home button.
2. While you’re holding the Home button, press the Menu button three times.
3. Let go of the Home button, then press the Menu button nine times.
4. Take the batteries out of your remote, then unplug your Firestick and wait for at least 60 seconds.
5. Put the batteries back into your remote and plug the Firestick back in.
6. When the Firestick’s homepage appears, press and hold the Home button for at least 40 seconds.
7. Wait a minute for the remote setup to finish.
How To Factory Reset Firestick Or Fire Tv
How to reset the Fire Stick to factory settings. Go to the Settings menu on your Firestick / Fire TV. Click on the My Fire TV icon. Select the Restore factory settings option. Click the “Reset” button. Give the system a few seconds to do its job. At this point, your Firestick/Fire TV will reboot automatically. You will then be prompted to connect to a Wi-Fi network.
Recommended Reading: How To Read Amazon Ebooks On Pc
How To Restart An Amazon Fire Tablet
Joe Fedewa is a Staff Writer at How-To Geek. He has close to a decade of experience covering consumer technology and previously worked as a News Editor at XDA Developers. Joe loves all things technology and is also an avid DIYer at heart. He has written thousands of articles, hundreds of tutorials, and dozens of reviews. Read more…
Its not unusual for gadgets to occasionally act up. The same can be said for Amazons affordable Fire Tablets. Sometimes all you need to do is simply restart the device. Well show you how it works on a Fire tablet.
There are a lot of reasons why a device may need to be restarted, and it doesnt just apply to Fire Tablets. If your tablet seems slower than usual, isnt responding to touch, or just seems off, try restarting before trying more advanced solutions.
Turn Off Fire Stick With Your Voice:
Some versions of the remote will have an included microphone button. You can press the button to input a variety of commands with your voice. This includes searching, starting apps, returning to the home screen, and other basic TV remote functions.
If you have a Fire TV Edition television you also have the option to turn off the device. Simply press the microphone button, and say the command Alexa, turn off Fire TV. Unfortunately, there is no voice prompt for the standard Fire Stick to turn off the device.
You May Like: Read Amazon Kindle Books On Computer
What If My Firestick Wont Turn On
From time to time you may have an error that occurs within the Firestick where it wont turn on normally. The fix for this is fairly simple.
Essentially you will just need to hold down the power button on your Amazon firestick remote for 30 seconds while the TV is unplugged from the wall. Once 30 seconds has passed then you can plug the TV back in and turn it on. Then you just go to the correct fire stick input channel and it should be working just fine.
Restart Can Free Up Memory Space By Stopping Cross
When you restart your Firestick or Fire TV, the apps you have installed or moved to your SD card lose their ability to read and write. This is because of the heavy reading and writing involved in the process.
You can only restore permissions when you move the apps back to your internal storage. Or when you delete the folders in the external SD card and then reinstall the app on the SD card.
This may appear like a tiresome process. But it actually helps to improve the performance of your device by saving the resources that your device uses to access apps in SD cards and other external memory.
Don’t Miss: Chase Liquid Apple Pay
My Fire Tv Still Keeps Freezing What Can I Do
If the freezing seems to happen only when using certain channels or apps, you may want to try uninstalling then reinstalling the problematic channel or app.
You may also want to try a factory hard reset. A factory hard reset will wipe all data and settings from the device and set it back to how it was when you first purchased it. You can do this by going to Settings> My Fire TV, Device & Software or System> Reset to Factory Defaults. From there, enter your PIN, then choose Reset.
Alternately, you can press and hold Right and Escape on the remote to force a prompt to factory reset the Fire TV.
Restart Your Fire Tv Device
Unplug the power cord or adapter for three seconds, and then plug it back in.
To restart your device from the menu:
For more help, try our .
Was this information helpful?
Thank you for your feedback.
Please select what best describes the information:
Thanks! While we’re unable to respond directly to your feedback, we’ll use this information to improve our online Help.
Recommended Reading: How Much Is Amazon Audible Membership
How To Fix The Amazon Fire Stick Error Code: Device Reboot Required
Tired of seeing the amazon fire stick error code device reboot required error code while using your Amazon Fire Stick? This can occur for several reasons but is quite easy to resolve. Just a few simple steps can reboot your Amazon Fire Stick within minutes.
The Amazon Fire TV Stick is an excellent device that lets you access web content directly through your TV screen. The device is quite similar to a USB flash drive and has to be plugged into your TVs HDMI port. It also stores your personal settings and preferences in the device itself so that you can easily plug it into a different TV and yet have the same setup.
Heres what you need to do if you get the reboot error on your Amazon Fire Stick.
How To Power Off Firestick
What also causes confusion is the belief that the Firestick operates like any other regular device. Which is to say, it gets turned on then you turn it off.
The reality of the matter is that Fire TV turn off doesnt work like that. There is no real way to turn off the Amazon Firestick. All you can really do is turn off the power to it, or unplug it.
This doesnt mean that the Firestick is stuck being on at all times, though. In fact, the typical way that most users turn off their Firestick is by using sleep mode.
While sleep mode is normally turned on by waiting 20 minutes on the home screen, and disabled when you press any button, there are ways to force sleep mode on yourself.
There are two primary ways to put your Firestick in sleep mode, depending on whether or not youre using the app or a remote.
Using a remote control, the easiest method to put your Firestick into sleep mode is to select it through the quick access menu. To start, press and hold the home button on your remote for three seconds. This is going to enter the quick access screen on your TV.
In this menu, you should see the word sleep accompanied by a moon. If you select that, youre Amazon Fire TV Stick should enter sleep mode after the screen fades to black.
If, for some reason, you dont want to use the quick access menu or cant because the button is broken, there is another option for selecting sleep mode.
Read Also: How To Split A Payment On Amazon
Restart Fixes Memory Consumption Caused By Memory Leaks
Restarting your Fire TV regularly helps to fix excessive memory consumption caused by memory leaks. These leaks can end up filling up your devices available memory after some time.
A memory leak is basically your devices failure to release unused data from its memory. Its caused by an application that doesnt release unused objects from the memory.
When you restart your device, you start afresh on a clean slate. You release the unused data or objects from your memory caused by memory leaks.
How To Reprogram Firestick Remote To Tv
1) Connect the Firestick to your TV. To connect the Firestick to your TV, use the empty HDMI port on the back of your TV. 2) Turn on your television. Press the power button on the front of the TV or use the TV remote to turn on the TV. 3) Select Amazon Firestick HDMI source. Press the source button on the TV remote. Wait for the HDMI port connected to the Firestick to be selected. 4) Press and hold the Home button on the remote.
Also Check: Audible Cancellation Offers